Dell EMC
D-NWG-FN-23
Q1:
Which commands are required to properly configure an OS10 switch to run OSPF on eth1/1/3 and to add network 144.254.1.0/30 to OSPF area 0?
○
A
OS10(config)# interface ethernet 1/1/3 OS10(conf-if-eth1/1/3)# no shutdown OS10(conf-if-eth1/1/3)# no switchportOS10(conf-if-eth1/1/3)# ip address 144.254.1.2/30 OS10(conf-if-eth1/1/3)# ip ospf 1 area 0.0.0.0
OS10(config)# router ospf1
○
B
OS10(config)# router ospf 1OS10(config-router-ospf-1)# router-id 1.1.1.1 OS10(config)# interface ethernet 1/1/3 OS10(conf-if-eth1/1/3)# no shutdown OS10(conf-if-eth1/1/3)# no switchport OS10(conf-if-eth1/1/3)# ip ospf 1 area 0.0.0.0
○
C
OS10(config)# interface ethernet 1/1/3 OS10(conf-if-eth1/1/3)# no shutdownOS10(conf-if-eth1/1/3)# ip address 144.254.1.2/30 OS10(conf-if-eth1/1/3)# no switchport
OS10(conf-if-eth1/1/3)# ip ospf 1 area 0.0.0.0 OS10(config)# router ospf 1
○
D
OS10(config)# interface ethernet 1/1/3 OS10(conf-if-eth1/1/3)# no shutdownOS10(conf-if-eth1/1/3)# ip address 144.254.1.2/30 OS10(conf-if-eth1/1/3)# no switchport
OS10(conf-if-eth1/1/3)# ip ospf 1 area 0.0.0.0 OS10(conf-if-eth1/1/3)# router ospf 1
Dell EMC
D-NWG-FN-23
Q2:
What benefit does VRRP version 3 provide over VRRP version 2 in OS10?
○
A
Provides preemption capability.○
B
Provides MD5 authentication.○
C
Allows subsecond timers.○
D
Allows multiple masters in the topology.
Dell EMC
D-NWG-FN-23
Q3:
When installing OS10 on a switch from a USB drive, what format is used for the file system?
○
A
HFS+○
B
FAT32○
C
NTFS○
D
HFS
Dell EMC
D-NWG-FN-23
Q4:
A network administrator wants servers to avoid spanning-tree convergence immediately after connecting to a leaf switch. Which spanning-tree feature would allow this?
○
A
spanning-tree vlan priority 0○
B
spanning-tree port-type disabled○
C
spanning-tree port-priority 0○
D
spanning-tree port-type edge
Dell EMC
D-NWG-FN-23
Q5:
What is the maximum number of LLDP neighbors supported per system with OS10?
○
A
250○
B
256○
C
384○
D
512